Price: $50.00
(as of Mar 04, 2025 21:36:10 UTC – Details)
Product Description
The Slopper Stopper Deluxe Dripless Water Bowl is a Dripless Specialized Dog Water Bowl that reduces water spills and trails by up to 85% or more by not allowing the Muzzle of the Dog to get soaking wet. Are you tired of chasing your dog around the house with a towel mopping up the water mess? Are you tired of your Wood Floors being destroyed? Are you Tired of Water Trails to All Areas of the House? This Water Bowl greatly reduces the messy business of having to clean up after your 4 legged friends. A Custom Elevated Stand is also available. Slopper Stopper – “Taking Care of The Mess So You Don’t Have To!”
Reduces Water Spills and Trails Up To 85% or More!Helps Reduce Accidental Slips and Falls from Wet Floors Lid Design Keeps Ears, Beards, Feet & Snout Dry Slower Drinking Means No More Choking on Water It’s a Great Travel Bowl Can Also Be Used as a Food Bowl Will Work with Any Breed Size, there are 5 Models to Choose From. Choose Sizing WiselyHighest Industrial Strength Food Safety Materials UsedCustom Made Elevated Stand is also available, top of Bowl Edge is 10 Inches
Optimum Size Lid To Fit Your Dog Has These Characteristics: See Graphics Below
Vertical Lid Drinking Chamber Red Arrow Measurement – Your Dogs Overall Tongue LENGTH should be double the length of this measurement.Horizontal Lid Drinking Chamber Red Arrow Measurement – Your Dogs Tongue WIDTH should be 10 – 15% smaller than this measurement.
This Bowl Has a Two Week Break In Period for Maximum Results. Dogs that are overweight (meaning not fit) and are 5-10 pounds over the weight limit and with smaller snouts should consider a breed size lower for the Medium, Large and Giant Breed Models. If your dog is overweight use a weight that he is supposed to be.
If you are unsure of what size to order please reach out to the brand Slopper Stopper and send a picture of your dog in front of a doorway from 10 feet away and Slopper Stopper will advise as to what is best Breed Sized unit to get.
ALL BREED SIZE MODELS
Mammoth Breed Type Dogs
1 Gallon – Water CapacityDiameter 9.84 InchesBull Mastiffs St Bernards Larger Great Dane Newfoundland
Giant Breed Type Dogs
1 Gallon – Water CapacityDiameter 9.84 InchesGiant Schnauzer Rottweiler Very Large German Shepherd Smaller Great Dane
Large Breed Type Dogs
1 Gallon – Water CapacityDiameter 9.84 InchesLabs Weimreiners English Bulldog Boxer Golden Retriever Larger Golden Doodles Smaller German ShepherdBasset Hounds
Medium Breed Type Dogs
1 Gallon – Water CapacityDiameter 9.84 InchesAustralian ShepherdsCocker Spaniels BeaglesSmaller Golden Doodles Larger French Bulldogs Australian Cattle Dog
Small Breed Type Dogs 0 – 20 Lbs
1 Gallon – Water CapacityDiameter 9.84 InchesIdeal for multiple Small Dogs that have the ability to reach into the bowl, distance is 5 inches from edge of bowl to waterPugs Mini Schnauzers Chihuahuas Cats Toy Poodle Smaller French Bulldogs Yorkshire Terrier
XSM Small Breed Type Dogs 0 – 20 Lbs
1.25 Quart – Water CapacityDiameter 6.85 Inches, Ideal for 1 Small Dog or CatsPugsMini SchnauzersChihuahuasCatsToy PoodleSmaller French BulldogsYorkshire Terrier
Lid Only Parts – Replacement
All five 1 Gallon Breed Size Lids fit (are interchangeable) with the same Stainless or Tritan Plastic 1 Gallon Bowls
Need a different Breed Size Lid?
Lost your Lid?
Mammoth Breeds LID 130-200+ Lbs (9.84″ Dia) – SKU: P102HAGiant Breeds LID 86-130 Lbs (9.84″ Dia) – SKU: P102GALarge Breeds LID 51-85 Lbs (9.84″ Dia) – SKU: P102LAMedium Breeds LID 21-50 Lbs (9.84″ Dia) – SKU: P102MASmall/ XSM Small Breeds LID 0-20 Lbs (9.84″ Dia) – SKU: P102SA
5 Breed Size Pressure Plugs – Replacement
Mammoth Breeds 130-200+ Lbs (4″ Dia) – SKU: P105HAGiant Breeds 86-130 Lbs (3.47″ Dia) – SKU: P105GALarge Breeds 51-85 Lbs (2.95″ Dia) – SKU: P105LAMedium Breeds 21-50 Lbs (2.38″ Dia) – SKU: P105MASmall/ XSM Small Breeds 0-20 Lbs (1.67″ Dia) – SKU: P105SAReplaces yours if you misplaced it.Used to fill unit, Stays by sink after filling unit.Material: Silicone, Color: Black
Gaskets and FingerValve – Replacement
GASKETS:
Gasket Replacement to Seal Lid to Bowl. Two Gasket Sizes For:
1 Gallon Units (9.84″ Dia) – SKU: P420V4A1.25 Quart Unit (6.85″ Dia) – SKU: P420V4XSMA
Material: Silicone, Color: Black
FINGERVALVE:
Replacement Air Release Valve (Qty 2 per) for all Breed Size Lids
Elevated Stand – 10″ Bowl Height
Custom Made for only Slopper Stopper 1 Gallon BowlsMaterial: New Zeland PineColor: Finished in a Natural Water Sealant that enhances the beautiful woodTop of Edge Bowl Height of 10″ Inches
INDUSTRIAL STRENGTH MATERIALS
Plastic Lid – Clear Food Grade Tritan Material
Tritan Plastic Food Grade Lid : A 3.8mm Thick Industrial Heavy Duty Designed Plastic Lid, a car can run over the material and it will not crack. BPA free Tritan Plastic.5 Breed Size Lids
Stainless Steel Bowl or Tritan Plastic Bowl Options
Option 1> Stainless Steel Food Grade Bowl: 1 GALLON Water Capacity : A Stainless Steel Food Grade Metal Bowl (AISI 304 Food Grade 18/8 Stainless Steel 1 Millimeter Thick). Coated with FDA approved coating for use on commercial and noncommercial food-contact applications so the water beads nicely and gasket performs well.Option 2> Tritan Plastic Food Grade Bowl: 1 GALLON Water Capacity : A 3.8mm Thick Industrial Designed Plastic Bowl. BPA free Tritan Plastic (For 5 Breed Sizes – Mammoth, Giant, Large, Medium & Small Breeds)Option 3> Tritan Plastic Food Grade Bowl: 1.25 QUART Water Capacity : A 3.8mm Thick Industrial Designed Plastic Bowl. BPA free Tritan Plastic (For Only 1 Breed Size – XSM Small Breeds)
For full list of all Frequently Asked Questions visit the Slopper Stopper Store
FREQUENTLY ASKED QUESTIONS?
How does the dog get the water from the bowl?
Dogs drink like cats in that they reverse curl their tongue and plunge it into the water and the water ends up on the back side of the reverse cupped tongue in that chamber and also to the front side of their tongue as they pull it into their mouths and repeat the process. These Bowls have a pool of water at the base of the round shape of the lid roughly 1/2 of an inch deep. The distance from the top of the ball shape of the lid to down where the water level sits is roughly 1/2 the length of the average sized tongue of the respective Breed Size Lid. The dog rests his muzzle at the top of the ball shape on top of the lid and his tongue laps up the water from the pool at the base of the round shape. As their tongue plunges into the pool of water the shape of the ball shape forces even more water up the sides of it and into that reverse cupped chamber on the backside of their tongue while they drink. The water automatically replenishes and stays at that 5/8 inch level.
Does the dog still get the same amount of water on a daily basis?
Yes, the Slopper Stopper bowl does slow down your dogs drinking by half the normal rate of consumption time but they continue to get the same amount of water they would normally drink throughout a day. The bowl allows for 85% or more of the water to be consumed by your dog versus other bowls, which end up with 30-50%+ of the sloppy water all over your floor, for you to clean up. For all those dogs that drink too fast and throw up because of it, this bowl greatly helps with this bad habit.
Why does my dog make more of a mess than I thought he would? There is a break in period of 2 to 3 weeks to see maximum results.
The majority of cases it works right away but sometimes can take up to 2 weeks for the maximum amount of mess to stop. For those first few weeks your dog may make more of a mess than you want and it is usually because they try and put their whole snout down into the circular area. At about 2 weeks he will get used to it and figure out that it is much more efficient to drink by resting his muzzle on the top of the ball shape instead of jamming his snout down into the hole. You can look to see roughly 85% of your old mess is gone using this bowl, in some instances that percentage is even higher. We have seen many instances where a dog learns to drink from this bowl and then will only drink from it, even when there is a wide open/no top open water bowl next to it. They really enjoy drinking from the Slopper Stopper Bowl once they are used to it.
How long does it take for my dog to figure out how to use the bowl?
Some dogs go right to the water and start drinking, some may take a day or so to get use to it. An easy way to start them drinking from it is to put just a a little bit of peanut butter on your fingertip and rub it onto the inside lower edge of the ball shape of the lid. Once the dog smells the peanut butter they will go right to it and then realize there is fresh clean water for them to drink.
How effective is the unit at keeping the breeds with long ears, hairy ears and long beards completely dry when they drink?
The Utility Patented design prevents breeds with long ears, hairy ears and beards from get those areas wet. This greatly reduces those areas from getting wet and creating a mess. If you have a breed that has an especially long bearded dogs like a Labradoodle pay close attention to the width measurements of the lids above compared to the width of your dogs tongue and order the width that is 10-15% bigger than the width of your dogs tongue.
If I have multiple dogs, a smaller one and a larger one, can my smaller dog drink out of the bigger bowl?
This question depends on what type of smaller dog. If the smaller dog has a thinner and longer snout then yes, smaller dog will simply put his whole snout down into the circular area and drink from the water at the bottom. If you have a French Bulldog with a very wide face and short tongue that breed would have a problem drinking from a Large or a Giant Lid Bowl because their wide face gets in the way. Take a look at the opening sizes and then figure out whether your smaller dog can get his snout all the way to the water. Another option, you can always order a second bowl with the correct sizing for your smaller dog.
How effective is the unit at keeping the breeds with long ears, hairy ears and long beards completely dry when they drink?
The Utility Patented design prevents breeds with long ears, hairy ears and beards from getting those areas wet. This greatly reduces those areas from getting wet and creating a mess.
What if my dog is a puppy and not full grown and expected to continue to grow?
This bowl was designed to be used with a full grown dog. If you know your dog will continue to grow into a bigger sized Breed Lid than you’ll need to buy multiple lids to accommodate his growth. Example: You have a 4 Month Old Lab Puppy that will be roughly 70 pounds when full grown but he’s making a mess now and you want something that helps now. Well if he is 4 months old and only 35 pounds he needs a Medium Breeds Lid (21-50Lbs), then at full grown he needs the Large Breeds Lid (51-85Lbs). You would simply buy 1 extra Lid Only of the smaller Breed Size Lid, then switch it out to the Large Lid later on as he grows. Also note that puppies and dogs as they are growing are much worse of drinkers than at full grown as they are still developing size wise and mentally.
Is the Bowl DishWasher Safe?
Yes, but dishwashers in nature all have very different levels of hot water, we personally hand wash ours. All the parts are definitely dishwasher safe though.
How often should I clean the unit?
Wash the bowl and lid every two days and take out and clean the gasket every month.
Product Dimensions : 10.24 x 10.24 x 4.2 inches; 2.07 Pounds
Item model number : IP1LG
Date First Available : January 16, 2021
Manufacturer : Slopper Stopper
ASIN : B089YD8WZX
Country of Origin : USA
For Large Breed Dogs 51-85 Lbs – Made in USA
Bowl Diameter is 9.84”, Holds 1 Gallon of Water
Tritan Plastic Bowl and Tritan Plastic Lid
Comes with Bowl, Lid, Gasket, FingerValve, Pressure Plug, everything you need to have drier floors soon.
Read Product Description below to get correct size and for full information. A sizing chart is available down the page below.
Visit the Slopper Stopper Storefront on amazon for all product listings. Link to that Storefront is under the product title above.
There are no reviews yet.